A power dialer cadence is the schedule of calls, voicemails and texts a dialer works through for each lead. A solid default is 5 to 6 call attempts over 10 days, 3 to 4 voicemails and 2 to 3 texts, with the first call inside five minutes for inbound leads. Below you get the day-by-day table, call windows by time zone, copy-ready templates, exit rules and compliance guardrails.
Key takeaways
- A practical default cadence is 5 to 6 calls, 3 to 4 voicemails and 2 to 3 texts over 10 days, which totals 10 to 13 touches.
- Public guidance on attempts conflicts: Close's cold outbound guide uses 9 touches over 17 days, while other sources say 4 to 7 calls.
- Calls to a person's phone before 8 a.m. or after 9 p.m. in the called person's local time are treated as abusive under the FTC's Telemarketing Sales Rule.
- Text opt-outs such as STOP, QUIT and CANCEL must be honored within 10 business days under FCC TCPA revocation rules.
- Best-hour studies disagree, so rotate attempts through three local-time blocks and keep the one that connects best in your own logs.
What is a power dialer cadence?
A power dialer cadence is a repeatable plan that tells a power dialer which lead to call, on which day, in which time block, and whether to follow a missed call with a voicemail or text. It is the rulebook; the dialer is the engine that executes it. No single universal definition exists, so this guide defines it by what you configure.
Power vs progressive vs predictive dialers
A power dialer dials one number at a time for each rep and starts the next call when the rep finishes. Many vendors use "progressive" for the same behavior. A predictive dialer dials multiple numbers per rep and guesses availability, which raises the risk of abandoned calls. See power dialer vs auto dialer for the risk tradeoffs.
Cadence vs sequence vs campaign
A cadence is the timing and channel pattern for one lead. A sequence is usually the same thing inside a sales engagement tool. A campaign is the list plus the cadence plus the owner. Keep them separate so you can change timing without rebuilding lists.
Why the dialer changes how you space attempts
A power dialer removes manual dialing, so a rep can work a full list block in one sitting. That makes it easy to over-dial the same lead. Your cadence should cap attempts per day and force a different time block on each try.
How many call attempts per lead is right?
Plan 5 to 6 call attempts per lead over about 10 days, plus voicemails and texts, for a total of 10 to 13 touches. Public sources range from one call to 15 touches, and nearly all are vendor-produced, so treat every figure as directional and test against your own data.
The consensus: 4 to 7 calls, 9 to 15 touches
| Source | Guidance |
|---|---|
| Close cold outbound guide | Sample of 9 touches over 17 days, first call on day 4 |
| Close timing roundup | At least 6 call attempts over about 15 days |
| InsideSales (XANT) | Typical cadence averages about 6.6 attempts; reps believed they made about 15.5 touches |
| Hunter | 1 call |
| Our recommendation | 5 to 6 calls in 10 days, plus voicemails and texts |
Calls vs touches: count them separately
A call attempt is a dial. A touch is any outreach: call, voicemail, text or email. A cadence with 6 calls, 4 voicemails and 3 texts is 13 touches but only 6 call attempts. Report both numbers, or comparisons between teams will mislead you.
When to stop, and when to recycle into nurture
Stop calling after the final scheduled attempt, mark the lead "unresponsive" and move it to a low-frequency nurture list. Re-enter the cadence only on a new signal, such as a form fill or a pricing page visit. Never leave a lead in an endless loop.
What does a 10-day power dialer sequence look like?
A 10-day power dialer sequence front-loads attempts, then widens the gaps: two calls on day 1, then days 2, 4, 7 and 10. Attempts cluster early because intent and recall fade fast, and they widen later so you stay visible without becoming noise.
Speed-to-lead and the early cluster
Research cited by Close says a lead called within 5 minutes has about 100x the odds of connecting versus waiting 30 minutes, and Drift data shows roughly a 10x drop after the first five minutes. Those figures come from secondary summaries, so check the originals before quoting them. The direction is consistent: call inbound leads immediately.
Variant A: inbound or warm lead
| Day | Action | Channel | Window (local) | Running totals (calls / VMs / texts) |
|---|---|---|---|---|
| 1 | Call 1 within 5 minutes; if no answer, VM 1 and Text 1 | Call, VM, text | Immediately | 1 / 1 / 1 |
| 1 | Call 2, no voicemail | Call | 3 to 4 hours later | 2 / 1 / 1 |
| 2 | Call 3, VM 2 referencing the text | Call, VM | Different block | 3 / 2 / 1 |
| 4 | Call 4, then Text 2 (a question) | Call, text | Different block | 4 / 2 / 2 |
| 7 | Call 5, VM 3 (value drop) | Call, VM | Different block | 5 / 3 / 2 |
| 10 | Call 6, VM 4 (breakup), Text 3 (breakup) | Call, VM, text | Different block | 6 / 4 / 3 |
Rationale: day 1 captures intent, day 2 catches people who missed the first window, and the gaps then grow from two days to three. Leave a voicemail on about every other call so messages stay fresh.
Variant B: cold list
| Day | Action | Window (local) | Running totals (calls / VMs / texts) |
|---|---|---|---|
| 1 | Call 1, VM 1 | 9:30 to 11 a.m. | 1 / 1 / 0 |
| 3 | Call 2, no voicemail | 11 a.m. to 4 p.m. | 2 / 1 / 0 |
| 5 | Call 3, VM 3 (value drop) | 4 to 5 p.m. | 3 / 2 / 0 |
| 7 | Call 4, no voicemail | 9:30 to 11 a.m. | 4 / 2 / 0 |
| 10 | Call 5, VM 4 (breakup) | 11 a.m. to 4 p.m. | 5 / 3 / 0 |
Optional: one text after day 5 only if you have documented consent for that number. Cold lists get no more than 6 calls and a different time block on every attempt. Cold outbound does not justify the day-1 double dial, because there is no inbound intent to chase.
Dispositions and exit rules
A disposition is the outcome label a rep applies after each call. Many dialers let a disposition remove a contact from a cadence or move it to another one, so map each label to an action.
| Disposition | Action |
|---|---|
| No answer | Continue on schedule |
| Gatekeeper | Log the name, ask for best time, retry in a different block |
| Wrong number | Remove the number, look for another contact method |
| Callback requested | Pause cadence, create a task for the stated time |
| Not interested | Exit cadence, move to nurture |
| Do not call or STOP | Suppress all channels immediately |
| Connected and interested | Exit cadence, create deal or meeting |
What are the best call windows by time zone?
The best call window is the one that connects most often in your own logs, and it must be measured in the prospect's local time. Published studies disagree, so start with three blocks as hypotheses and rotate attempts through them.
Why you dial in the prospect's local time
Your rep in Chicago calling a Seattle prospect at 9:30 a.m. Central is reaching a person at 7:30 a.m. Pacific. Area code is not a reliable time-zone signal because people keep numbers when they move, so store a time zone on the lead record from address or company data.
Sources disagree: treat the blocks as tests
PhoneBurner's analysis of 11 million calls found 10 a.m. the most productive hour (15.53% of calls answered and leading to business conversations), with Wednesday strongest and Monday mornings and Friday afternoons weakest. Other analyses favor 8 to 11 a.m., 11 a.m. to 4 p.m. or 4 to 5 p.m., and many studies are vendor-produced or old. Hence three test blocks.
Window cheat sheet: when to dial Block A
Block A is 9:30 to 11 a.m. in the prospect's time zone. Find your rep's zone in the left column and the prospect's zone across the top.
| Rep dials from | Prospect in ET | Prospect in CT | Prospect in MT | Prospect in PT |
|---|---|---|---|---|
| Eastern | 9:30 to 11 | 10:30 to 12 | 11:30 to 1 | 12:30 to 2 |
| Central | 8:30 to 10 | 9:30 to 11 | 10:30 to 12 | 11:30 to 1 |
| Mountain | 7:30 to 9 | 8:30 to 10 | 9:30 to 11 | 10:30 to 12 |
| Pacific | 6:30 to 8 | 7:30 to 9 | 8:30 to 10 | 9:30 to 11 |
Apply the same offsets to Block B (11 a.m. to 4 p.m.) and Block C (4 to 5 p.m.). A Pacific prospect at 4 to 5 p.m. is 7 to 8 p.m. Eastern for the rep, so Block C works better for east-to-west dialing than the reverse.
How to A/B test windows on your own data
Change one variable at a time. Run each block for two weeks on similar lists, compare connect rate and conversations per hour, then keep the winner. Never use fewer than a few hundred dials per block before deciding.
Legal limit
Never schedule dials before 8 a.m. or after 9 p.m. in the prospect's local time. Set the dialer to enforce this rather than relying on rep discipline.
What should you say in a voicemail?
A good voicemail is under 25 seconds, names who you are and why you called, gives one reason to call back, and repeats your number once. Use a different message each time so the second voicemail adds something new. For more greeting copy, see business voicemail greetings.
Voicemail 1 (short and specific): "Hi {{first_name}}, this is {{rep}} from {{company}}. I'm calling about {{specific_reason}}. I'll try you again {{day}}. If sooner is better, my number is {{number}}."
Voicemail 2 (reference the text): "{{first_name}}, {{rep}} again from {{company}}. I just sent a text with one quick question about {{topic}}. A one-word reply works. Or call me at {{number}}."
Voicemail 3 (value drop): "Hi {{first_name}}, {{rep}} at {{company}}. Teams like {{role_or_industry}} often struggle with {{problem}}. We have a short {{resource_or_idea}} on that. Call {{number}} and I'll send it over."
Final breakup voicemail: "{{first_name}}, {{rep}} at {{company}}. I haven't heard back, so I'll assume the timing is off and close your file. If {{topic}} comes up later, reach me at {{number}}."
Manual review vs blind voicemail drop
A voicemail drop plays a pre-recorded message with one click. Use it for voicemails 2 and 4, which are generic by design. For voicemail 1 and 3, many power dialers pause between calls, so use that pause to add the prospect's name or a detail from the CRM. A recording that says the wrong name costs more than the 10 seconds you saved.
What should a text say after a missed call?
A follow-up text should reference the missed call, ask one low-effort question, stay under 160 characters and include opt-out language. Send it within minutes of the first voicemail, not hours later. Never send marketing texts to numbers without documented consent.
- After first voicemail: "Hi {{first}}, {{rep}} from {{company}}. Just tried you about {{topic}}. Good time for a quick call? Reply STOP to opt out."
- Question, not a pitch: "{{first}}, quick question: is {{problem}} a priority this quarter? Yes or no is fine. -{{rep}}, {{company}}. STOP to opt out."
- Breakup text: "{{first}}, I'll stop reaching out unless you tell me otherwise. If {{topic}} becomes relevant, text me anytime. -{{rep}}. STOP to opt out."
Opt-outs and consent
Under FCC TCPA rules, STOP, QUIT and CANCEL are accepted as reasonable revocation and must be honored within 10 business days. The separate "revoke-all" provision (47 CFR 64.1200(a)(10)) was pushed to January 31, 2027 by order DA-26-12. Confirm the current status before relying on it, and honor opt-outs across every channel in practice. This is not legal advice. For deeper coverage, read TCPA compliance for sales calls.
How do you open the call and handle a gatekeeper?
A strong cold call opener states who you are, why you called and asks permission in under 10 seconds. A gatekeeper script stays polite, specific and brief. Keep both short enough to say from memory.
10-second opener
"Hi {{first_name}}, this is {{rep}} from {{company}}. I know I'm calling out of the blue. I help {{role}} with {{problem}}. Do you have 30 seconds for me to tell you why I called?"
Handling a gatekeeper
"Hi, this is {{rep}} from {{company}}. I'm trying to reach {{first_name}} about {{specific_topic}}. Who would be best to speak with, and when is {{first_name}} usually free?" Log the name and the time they give you, then call in that window.
Handling "send me an email"
"Happy to. So I send something relevant, what is the one problem you'd want it to address? And I'll follow up {{day}} to see if it was useful." Then log it as a callback.
What compliance rules apply to a call cadence?
Call only between 8 a.m. and 9 p.m. in the called person's local time, honor opt-outs fast, scrub against Do Not Call lists where they apply and keep logs of every attempt. The FTC's Telemarketing Sales Rule sets the baseline, but state laws and text rules add requirements.
Calling hours and abandoned calls
The TSR treats calls before 8 a.m. or after 9 p.m. as abusive and prohibits abandoned outbound calls, subject to a safe harbor. Verify the abandonment threshold in the full rule text. A power dialer that connects one call per rep reduces that risk compared with predictive dialing.
Do Not Call and state rules
Most B2B calls are exempt from parts of the TSR, but not calls selling nondurable office or cleaning supplies. Several states have their own registries and calling-hour rules, so check each state you call. Have counsel review your policy.
Keep attempt logs
Store the date, time, number, disposition and any opt-out for each attempt. If a complaint arrives, those records are your defense. Also check call recording laws by state before recording.
How do you set the cadence up in a dialer?
Build the cadence as a queue: order the list, enforce time zones and calling hours, attach the voicemail and text steps, then sync every outcome to your CRM. Configure the rules once so reps follow the plan without thinking about it.
List order and lead priority
Sort inbound and warm leads first, then recent form fills, then cold lists. Within each group, sort by time zone so each block dials people inside their target window.
Local presence and caller ID
Use a local-looking number only if your dialer supports it and your state rules allow it. Always make the number callable, since voicemail callbacks go to it.
Voicemail drop and auto-text steps
Record voicemails 2 and 4 as drops. Add the three text templates as steps that fire after the matching call, and keep a suppression list that blocks any text to a number that replied STOP.
CRM sync and disposition mapping
Map each disposition from the table above to a CRM status and a cadence action. In HubSpot, that means writing call outcomes and notes to the contact timeline. Compare options in power dialer for HubSpot.
Voicalyst checklist
Voicalyst's power dialer, business texting and HubSpot calling integration cover the three layers above. Confirm current feature details with the team before you build, then run this checklist:
- Lead time zones stored and calling hours enforced
- Call, voicemail and text steps mapped to days 1 to 10
- Dispositions mapped to exit and nurture actions
- STOP replies suppress future texts
- Call outcomes syncing to the CRM
How do you measure and tune a cadence?
Track four numbers weekly: connect rate, conversations per hour, voicemail callback rate and attempts to first conversation. Change one variable at a time so you know what caused any shift. Avoid borrowing outside benchmarks; compare against your own previous weeks.
Metrics
- Connect rate: answered calls divided by dials.
- Conversations per hour: live conversations divided by dialing hours.
- Voicemail callback rate: callbacks divided by voicemails left.
- Attempts to first conversation: how many touches it takes on average.
What to change first when connect rate is low
Start with time blocks, then attempt spacing, then number quality. Our guide to increasing call connect rate covers each lever. Only after those, test voicemail length or text wording.
A simple weekly review
- Pull last week's dials by time block and zone.
- Compare connect rate and conversations per hour across blocks.
- Pick one change, such as shifting one attempt to a different block.
- Run it for two weeks, then keep or revert.
If you want to build this cadence without stitching tools together, see how Voicalyst works.
Frequently Asked Questions
How many times should you call a lead before giving up?
Plan 5 to 6 call attempts over about 10 days for most leads, spaced wider as the sequence goes on. Public guidance ranges from a single call to six or more calls over roughly 15 days. After the final attempt, move the lead to nurture instead of deleting it.
What is the best time to cold call?
No single hour wins across studies. Published analyses point to late morning, midday to afternoon, or late afternoon, and they are mostly vendor-produced. Start with three local-time blocks (9:30 to 11 a.m., 11 a.m. to 4 p.m., 4 to 5 p.m.), rotate attempts through them, and keep the block that connects best.
What is the difference between a power dialer and a predictive dialer?
A power dialer places one call at a time per rep and moves to the next number after the rep finishes. A predictive dialer dials several numbers per rep and predicts who will be free, which can leave answered calls with no rep available. Power dialers trade some speed for control.
Should you leave a voicemail every time?
No. Leaving a message on every attempt trains prospects to ignore you and wastes dial time. A practical pattern is a voicemail on roughly every other attempt, with a different message each time, and a final breakup voicemail on the last call.
Is it legal to text after a missed call?
It depends on consent and content. Marketing texts generally require prior consent under the TCPA, and you must honor opt-outs like STOP, QUIT and CANCEL within 10 business days. Texting an inbound lead who asked to be contacted is lower risk than texting a cold list. Confirm with counsel.